ZIRCON 71432 SuperScan M2 Wood and Metal Stud Finder

Description

Featuring new, revolutionary Target Control Level 1 Technology. The Zircon SuperScan M2 advanced stud finder is tuned to find clean, wood studs while filtering out metallic false positive objects, such as plumbing, conduit, straps, brackets or ducts, hiding behind surfaces. The LoLevel and MetalliWarning Indicators alert to the presence of dangerous, deep, less dense false positives and metal targets, reducing the chance of accidentally drilling into a piece of metal or plastic pipe. with the addition of Zircon's proprietary DeepScan mode, users can increase scanning power when necessary, making for a more robust and multi-functional tool. he SuperScan M2 offers 3 distinct detection modes - TC, StudScan and DeepScan. A 2-mode switch makes it easy to toggle between functions, while the ColorTrip Display conveniently details information. The screen illuminates pale blue in TC mode and locates the center, edges and direction of wood studs, while also enabling the user to identify safe-to-drill zones by utilizing the new 'Trust but Verify' technique. When TC mode is off, the tool will perform in StudScan mode indicating the center, edges and direction of both wood and metal studs. DeepScan mode doubles the scanning depth to reach deeper targets beneath extra layers of drywall or paneling. The Target Spotlight illuminates on screen when the center of a stud is found and SpotLite Pointer shines on the scanned surface.
New target control mode locates the center, edges and direction of wood studs and not metal, up to 3/4 in. D (19 mm) behind surfaces, identifies safe-to-drill zones between adjacent drywall screws, nails and protector plates
StudScan mode locates center, edges and direction of wood and metal studs up to 3/4 in. D (19 mm)
Deep scan mode doubles the scan depth of wood and metal studs up to 1-1/2 in. D (38 mm)
WireWarning detection alerts to live, unshielded AC wires up to 2 in. D (50 mm)
LoLevel indicator displays low (weak) signal objects, such as plastic water pipes while in TC mode
Signal strength indicator helps distinguish between shallow and deep targets while in studs can and deepscan modes
MetalliWarning indicator turns on when metal objects are detected in all modes
ACT (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
Low battery indicator for optimum performance (9-Volt battery required, not included)
Target spotlight illuminates on screen when stud center is detected
ColorTrip display illuminates pale blue in TC mode, green in DeepScan mode and red to alert the presence of live AC electricity
SpotLite pointer shines an arrow-shaped light on the scanned surface to indicate the center of a stud
V marker groove enables accurate marking of stud location
Item has been tested for correct operation.