-40%
3 Linear Field. Hall Effect Sensor. Ratiometric Output.
3 Linear Field. Hall Effect Sensor. Ratiometric Output.

3 Linear Field. Hall Effect Sensor. Ratiometric Output.

$ 4.77

Availability: 1058 in stock
  • Country/Region of Manufacture: Unknown
  • Model: Unknown
  • Condition: New
  • Refund will be given as: Money Back
  • Brand: Unknown
  • Restocking Fee: No
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller

    Description

    Note:
    This order comes with 3 Sensors (3 Sensors per order) but
    the specs below is for one of the Sensors.
    Note:
    Looking at the black head of the Hall Effect Sensor, the side that has a writing of
    A
    is the top face and the other side is the bottom face.
    Place the Hall Effect Sensor so that the bottom face is against the table and top face is the face that you can see. Looking down at the top face with the pins facing towards you. The first pin is the Positive (+), the second pin is the Ground (-) and the third pin is the Output.
    When there is no magnetic field present, the output voltage is half the supply voltage.
    When a South pole is present, the output voltage is greater than “half the supply voltage”. The stronger the magnetic field (south pole), the higher the output voltage.
    When a North pole is present, the output voltage is less than “half the supply voltage”. The stronger the magnetic field (North Field), the lower the output voltage.
    Note:
    1) Do not exceed the limits of the sensor especially the output current limit. Use a resistor or other components when needed.
    2) For applications requiring a higher output current greater than the maximum output current rating, use an amplifier such as a transistor or to carry that amount of current.
    3) For DC Motor applications, remember to use a diode to drain the spike voltage that occurs when the current is automatically turned off.
    Basic Specs:
    Supply Voltage minimum:
    4.5V
    Supply Voltage maximum:
    8V
    Supply Current max:
    11 mA
    Output Current max:
    10 mA
    Operating Temp:
    -40 to 185F
    Maximum Junction Temp:
    329F
    Storage Temp:
    -85F to 338F
    Magnetic Sensitivity:
    2.5mV/G
    Quiescent Output Voltage:
    2.5V (at 5V, 77F ambient)
    Note:
    Quiescent Output Voltage refers to the output voltage where there is no magnetic field present. B = OG.
    FEATURES/BENEFITS
    ·
    Low-noise output.
    ·
    Fast power-on time.
    ·
    Ratiometric rail-to-rail output.
    ·
    Solid-state reliability
    ·
    Factory-programmed at end-of-line for optimum performance.
    ·
    Robust ESD performance.
    ·
    Easy to use.
    ·
    Durable.
    ·
    Safe.
    ·
    Well designed
    ·
    Easy to install
    TYPICAL APPLICATIONS
    ·
    Brush-less DC Motor Commutation.
    ·
    RPM Detection.
    ·
    Consumer and industrial position sensor.
    ·
    Flow meters.
    ·
    Ideal for making electromagnets.
    ·
    LED blinkers and pulsations.
    ·
    Relays.
    ·
    Electronic communication.
    ·
    Inductors.
    ·
    Radiofrequency.
    ·
    Solenoids.
    ·
    Small Transformers.
    ·
    Motors
    ·
    Timer.
    ·
    Automotive.
    ·
    Environmental Solutions.
    ·
    General.
    ·
    Laboratory.
    Sellers Comment:
    Please if you have any problem with the product or shipping method, please contact before leaving a neutral or negative feedback and the issue would definitely be taking care of. It is an optimum responsibility to make sure that you are a satisfied customer. Thank You.